Design process and depth of video USB security monitoring module system engineering


A. 1.1 the design of video security monitoring system engineering should be in accordance with the "preparation of design specification, site investigation and preliminary design"


Step design, scheme demonstration and preparation of construction drawing design documents (formal design).


A. 1.2 for the video security monitoring system project of new buildings, the construction unit shall provide the video security monitoring system with


The design unit shall provide design information about the general situation of the building, electrical and pipe trench routing, etc.


A. 2. Preparation of design specification


A. 2.1 before the engineering design of video security monitoring system, the construction unit shall put forward the design according to the security requirements


Mission statement.


A. 2.2 the design specification shall include the following contents:


1. The source of the task.


2. Relevant regulations and management requirements of government departments (including the risk level and protection level of protection objects).


3. The safety management status and requirements of the construction unit.


4. The contents and requirements of the project (including functional requirements, performance indicators, monitoring center requirements, and training)


Training and maintenance services, etc.).


5. Construction period.


6. Project investment control amount and fund source.


A. 3 site investigation


A. 3.1 before the engineering design of video security monitoring system, the design unit and the construction unit shall carry out on-site investigation, and


Prepare site investigation report.


A. 3.2 the site investigation shall comply with the current national standard technical code for safety engineering GB 50348

Relevant regulations.